How to Conjugate the French Verb Cuire (to Cook)

Juvenile Vs Juvenile - 915 Words

Juvenile v. Adult Corrections Juvenile delinquents use to not face police or a correction system, only the fear and punishment of their families. However, as the juvenile delinquents aged they were faced with harsher punishments, but it was not until the 1800s reformers started looking for ways to teach values and built asylum and training schools. Then the concept of parens patriae occurred to establish the right to intervene in a child’s life when there were issues (Siegel, 2016). The next major change was in 1967 with the case In re Gault, when the Supreme Courts give juvenile due process rights and attorneys. The United States established the juvenile correction system to have the best intentions to help juvenile delinquents change†¦show more content†¦There are excessive caseloads and overcrowding in both detentions for juveniles and jails for adults. Both adult and juvenile corrections deal with understaffing issues, training, and stressful environments that burn the employees out. Law enforcement officers use their own discretion with both offenders and everyone is entitled to receive Miranda rights when arrested. In addition to receiving their Miranda rights, both offenders are entitled to know their what they are being charged with (Hirby, 2013). Also, both adult and juvenile offenders are entitled to an attorney. Also, both offenders can be put in pretrial facilities, while both courts use the method of innocent until proven guilty. Both offenders can receive plea bargains or sentenced to probation or institutional facilities. There are boot camps for both adults and juveniles. Lastly, once an adult or juvenile is released, they can be placed under supervision in the community. Differences Between Adult and Juvenile Corrections Although there are similarities in adult and juvenile corrections, there are also plenty of differences. Adults cannot be arrest for status offenders, whereas juveniles can be arrested for non-criminal acts. Unlike adults, the age of a child must be taken into consideration when being questioned. Also, the age of a child will establish the jurisdiction of the juvenile court, not for an adult. While adult court proceedings are formal, juvenile are moreShow MoreRelatedJuvenile Court Vs. Adult1452 Words   |  6 Pagesthe punishment they deserve the same. The difference between juvenile court and adult court have been distinct. The issue has been a controversial one for a long time. The two justice systems, juvenile court and adult court have been long established for decades. Both involve people accused of crimes with the basic individual rights in the court. According to Pacific Juvenile Defender Center, it stated, â€Å"Youth may be held under juvenile court jurisdiction from age 12 until age 21, or until age 25Read MoreJuvenile vs Adult Justice System Essay989 Words   |  4 PagesAdult Justice v Juvenile Justice System There is no question that if a person is involved in any type of crime they will at some time make their way through the justice system. However, when that person is an adolescent they will go through the juvenile justice system, as an adult would go through the adult justice system. Even though the crimes of each can be of the same manner or hold the same severity the punishment results can differ. The main reason for having the two different justiceRead MoreJuvenile System vs Adult System609 Words   |  3 PagesMy thoughts on this subject are pretty limited in reference to the similarities and differences between the juvenile and adult justice systems. What I have known is that in Colorado anyone under the age of 18 is considered a juvenile and if they commit a crime and if they are charged they go to a juvenile facility. Depending on the seriousness of the charge determines if they would be held or released to their parents. I believe their parents must be notified and present when they are advised ofRead MoreJuvenile Rehabilitation: Adult Prison vs. Juvenile Incarceration1703 Words   |  7 PagesJuvenile Rehabilitation: Adult Prisons vs. Juvenile Incarceration Maureen Fries-Labra English 122 Anna Hopson December 14, 2009 Juvenile Rehabilitation: Adult Prisons vs. Juvenile Incarceration The criminal justice system has a branch for juvenile offenders. Established in the early twentieth century; it is the responsibility of this division to decide the fates of youthful offenders. This is administered by family court with support of social workers and family. With the increased numberRead MoreJuvenile Vs. Adult Corrections939 Words   |  4 PagesJuvenile vs. Adult Corrections The correctional justice system of the United States focused to keep crime out of the streets. The age group divides once the criminal becomes eighteen or above, but sometimes the lines are drawn at the age eighteen to determine if the criminal is convicted of a crime as a juvenile or as an adult. The system allows a rehabilitation facility to maintain criminals from relapsing an offense they have done or will do in the future. Although, criminals charged as an adultRead MoreJuvenile Delinquency : Should Severity Of Punishment For Young Offenders Be The Same As Adults?1200 Words   |  5 PagesJuvenile Delinquency: Should Severity of Punishment for Young Offenders Be the Same as Adults? Throughout centuries of development, crime and social safety are still the biggest concerns for a country since it can influence the political, economic, and social aspects. With the evolution of human civilization, more than seventy percent of the world has been urbanized into developed countries. These countries contain advanced technologies, highly-comprehensive policies and economic system. Along withRead MoreJuvenile Delinquency Prevention Act Of 19741576 Words   |  7 Pagesexploring the internet on juvenile delinquents. We as a class have had many good questions to answer about the different ways juveniles are treated, and what the correct or incorrect treatment is for juveniles. We have written many papers and had many discussion on historical milestones, landmark cases, adult courts, juvenile courts, probation and parole, detention centers and juvenile training programs. This semester has really changed the way that I look at juvenile delinquents. Three historicalRead MoreAccording To T. Williams At Https://Www.Nytimes.Com/2016/12/29/Us/Us-Prison-Population.Html?_R=0,1236 Words   |  5 Pagesdecreasing. The opposite can be said about juvenile related crimes which seem to be increasing. In this paper, I will be providing my reasons as to why I believe juvenile related crimes are going up, as well as talk about two programs that are working to keep at risk youth out of the criminal justice system. To start with I will be providing my opinion as to why juvenile related crimes are increasing. I do believe that the number one cause of juvenile related crimes is due to how a family is structuredRead MoreJuvenile Delinquency Essay1646 Words   |  7 PagesA juvenile delinquent offense is an act committed by a juvenile for which an adult would be tried at a criminal court. New statistics give an alarming picture: juvenile delinquency is higher as never before. According to the census bureau, in 2008 there were 1,653,000 recorded delinquent offenses in the United States. This is a 23.6% increase from 1990 when 1,337,000 delinquent offenses occurred. Today, a lot of people demand lowering the age of criminal responsibility and draconian penalties (JensonRead MoreCriminal Law Foundations evaluation paper1641 Words   |  7 PagesCriminal Law Foundations Evaluation The Juvenile Justice System Juvenile justice is the section of law that applies to persons under the age of 18 not capable of receiving sentencing in the adult court system or old enough to be responsible for criminal acts committed in society. In most states the age of criminal culpability is 18 however, the age requirement can be set lower in accordance to certain crimes and statutes set by the state the juvenile lives in. Juvenile law is primarily run by state law

The Famous Mona Lisa Was Created During The Renaissance Essay

The famous Mona Lisa was created during the Renaissance by Leonardo da Vinci. The Renaissance began in the 14th century and ended in the 17th century. A minority of Italian thinkers decided it was time to begin a new age. It was a European period that linked between the Middle Ages and modern history. It was a revival in interests of artistic achievements and literature of the Classical world. Renaissance also means, A revival or rebirth. The Renaissance invented and created many methods that changed artwork and education for the world. They improved science and technology to another level that reformed the world. The movement began in Italy where libraries and academies thrived but eventually will spread throughout Europe. Exploration was changed in the movement where new continents would be discovered. Printing, astronomy, growth of commerce, innovations, and gunpowder also played roles in the Renaissance. Humanism was a big theme at the time. Leonardo was The Renaissance Man becau se he applied his science knowledge through every aspect of life. His inventions and methods were remarkable for his time, but his artwork was very dramatic and expressed a lot of meaning. There is a huge appreciation for this time period. Leonardo da Vinci was a leading artist during the Renaissance period who created many of master works that are admired throughout history. Da Vinci was born in a farmhouse on April 15, 1452 in Vinci, Italy. Leonardo was a vegetarian who loved animals and wasShow MoreRelatedThe Renaissance Painting : Leonardo Da Vinci And Leonardo Da Vinci971 Words   |  4 PagesStrickland stated in her book â€Å"The Annotated Mona Lisa† (32). During the Renaissance period, artists discovered new techniques, that gave paintings and sculptures more character. It seems, the paintings that were created during this time, have multiple layers that give the paintings more meaning and makes the painting livelier. An artist before the Renaissance period used tempera paint on a wood panel. However, artists creating art during the Renaissance period used fresco on plaster walls and oilRead MoreAnalysis of Da Vincis Work as Being Reflective and Definitive of the Renaissance Period948 Words   |  4 P agesLeonardo Da Vinci and the Renaissance Period Objective The objective of this work examines the how Leonardo Da Vincis work is reflective and definitive of the Renaissance period and as well, describes some of Da Vincis art. This work will discuss the use of line, form, color, texture, and materials as found within one of his works and will state reasons this time period was chosen to examine in this work and why it is found to be appealing. Introduction Leonardo Da Vince was born April 15, 1452 nearRead MoreThe Renaissance Era915 Words   |  4 Pageswar came the Renaissance. The Renaissance was an era of cultural rebirth that swept across Europe during the 14th to the 17th century . This era marked the time in which man returned to their classical learning and values of ancient Rome and Greece and began to change their attitude towards religion (Renaissance Art). While the Renaissance is in the past it continues to live on throughout many different fields of art, theories and movements. However, paintings such as â€Å"the Mona Lisa†, â€Å"The SchoolRead MoreLeonardo Da Vinci And The Renaissance Era1572 Words   |  7 Pagesartworks created that have lived through the force of time. These masterpieces are created to represent the time of its creation. During the Renaissance Era, the humanist and classical values of art flourished. One of the great masters of the Renaissance known as Leonardo Da Vinci, dominated the perio d of the High Renaissance. The values of the Renaissance exist in the works of Leonardo Da Vinci portrayed through his paintings of Mona Lisa, The Last Supper, and Salvator Mundi. The Renaissance Era wasRead MoreLeonardo Da Vinci And The Renaissance Period1455 Words   |  6 Pagesone of the world’s greatest mind and artist? Leonardo Da Vinci was born on April 14, 1452 in the town of Vinci near Florence Italy. He lived during the fifteenth century, a period when the people of Europe were becoming interested in art that was known as the Renaissance period (1). Leonardo was well renowned for many other occupations such as a sculpture, architect, engineer, inventor and scientist. However, some of his most famous and brilliant work are from his paintings. Leonardo used what heRead MoreStudying Renaissance through Its Art Essay1269 Words   |  6 Pagesthat most expresses is the Renaissance. The Renaissance is known for the paintings, sculptures and most decorative art from the European period history. It was known as the â€Å"rebirth† and mostly is the period in the European civilization mostly following the middle ages. The Renaissance was the period that had discovery and explorations of the new continents that substituted the Copernican for the Ptolemaic system of the astronomy (The Beginning Progress of the Renaissance R. A. Guisepi). The feudalRead MoreHistorical And Scholarly Movement Of The 18th And 17th Century933 Words   |  4 PagesIn the 16th and 17th century many great unknown and known artist have made many works of art that can still be seen today. During the 16th century, the renaissance was a cultural and scholarly movement that started out in Italy during the middle ages and later spreading across Europe. Some artists from this era include Michelangelo, Leonardo Di Vinci, and Raphael. During the early 17th century the Baroque Period changed th e way artist make their works. Baroque artwork is mainly a change in paintingsRead MoreWhat Does The Renaissance Means and Where It Started1514 Words   |  7 PagesWhat Renaissance means and where it started The word â€Å"renaissance† means re-birth and also re-awakening. It also meant the activity, motion and even time of the big and great revival of not only art, but literature, learning, culture and science. Renaissance as a word symbolizes the revival of many aspects of life and also the transition from the medieval times to the modern times. Renaissance started in the 14th century in the republic of Florence (â€Å"Firenze† in Italian) in the north of Italy. Read MoreThe Mona Lisa Illusion : Art Collectors1838 Words   |  8 PagesThe Mona Lisa Illusion As one of the most renowned paintings of all time, the Mona Lisa, a half-length portrait of a woman painted by the Italian artist Leonardo da Vinci between 1503 and 1506, attracts millions of visitors to the Louvre each year. When seeing the painting, people interpret it differently. Does the smile reveal a mischievous smirk, a peaceful expression, or an empty heart? There is no set answer. For artists, being able to imitate the Mona Lisa demonstrates their solid artisticRead MoreEssay on The Renaissance: Visual Analysis1515 Words   |  7 PagesHigh Renaissance Visual Analysis Introduction Generally believed to have begun in Florence, the Renaissance – also known as the ‘Rebirth’ – was a period of reviving interest in classical art and the beginning of scientific revolution. The Renaissance period did not begin abruptly; instead, it was an idea that took shape since the time of the painter Giotto (Gombrich 2007). In the early Renaissance period, Giotto experimented with and laid the foundation for painting with perspective, a method

Software Project Management Plan Bank of South Australia ATM Software

Question: Describe about the Bank of South Australia ATM Software Project? Answer: Executive Summary The project is concerned about the SPMP of Bank of South Australia ATM Software Project for easy access of money by the customers. The project management plan includes the tools and techniques that are essential for the exact deliverable of the project. The waterfall model has been taken for the software development cycle that helps in software project management plan of the given project. The Project managers of this project used Microsoft front page for writing and documenting the files that are stored with the esteemed description of ATM software. The budgeting and other financial constraints and requirements are also well discussed for the successful completion of the project. 1.0 Introduction A software project is a sum total procedure of developing software starting from the blueprint of the idea to testing, maintain and executing the project in a specified time period. Deeprose (2002) commented on the fact that for building and execution of successful software, it is necessary to take into account the environmental and business constrains and limitations that may bring risk to the development of the software. In addition to this, Lock (2004) had a view that the factors that need to be considered sat the time of developing a software project are the time, cost and quality. The report will be dealing with the software project of The Bank of South Australia regarding the introduction of ATM system for the easy availability of money to the customers. The Bank of South Australia is one of the largest financial organizations in South Australia having its headquarters in Adelaide. It is concerned with the products such as personal banking, insurance and business banking. This report will be dealing with the purpose, scope and overview of the contents in this document (Banksa.com.au, 2015). 1.1 Purpose The purpose of this project is to analyze and discuss the nee and requirements of implementation, maintenance and designing of the software for the ATM of the bank. This project is so prepared that will help in understanding the requirement of the ATM system to the customers of the bank as well as the requirements that are essential for setting the system (Peslak, 2012). This research will be also helpful to know about the needful of the bank that are essential for setting up the ATM system successfully within the organization. 1.2 Scope In todays world, the usage of ATM is very essential for all the people so in order to facilitate the customers with easy access of money, it is essential (Meng and Gallagher, 2012). This project has a quiet huge scope as it facilitates the users in accessing the money easily whenever and wherever it is required. 1.3 Overview of contents of documenting The project is so prepared keeping in mind the overview of the project keeping in mind the project deliverable and project summary. The project organization is also discussed that includes the project responsibilities and the process models. The project management and control takes into account the way of managing the project and way to formulate the project for the maximum utilization of the ATM to the users (Meng, 2012). In addition to this, the technical process is also discussed keeping in mind the methods, techniques and tools used for this project. Moreover, the activities, budgeting and scheduling of the job also need to keep in mind. 2.0 Project Overview 2.1 Project Summary The vendor of the project Bank of South Australia ATM Software Project is Terasoft. The project is so made that aims in provide g help to the customers of the bank. Each of the phases of the project are constructed, reviewed as well as approved by the sponsor of the project. Kodukula (2014) commented on the fact that the project has to be made in such a way that it will help the customers in the way that it is intended to do so. The purpose of the project is to coordinate the constraints and expectations of both the parties that is between the bank and the sponsor. The aim of this project is to capture the internal processes that are required for accomplishing the goals. Petit, (2012) had a view that this project includes initially the blueprint of the project that is essential for the flow of the project. The project must be such that it has to be familiar with the surroundings and environment of the places where the project will be useful. 2.2 Project Deliverables The deliverables are generally the output of the project that can be assessed meaningfully. The deliverables are the project indicators that show both the clients and vendors the progress of the project. According to Randolph (2012) for the successful completion of the project, there are many necessities that need to be delivered to the project manager before the project gets delivered. The different phases that are essential for the project are discussed below- Phases Deliverables Analysis of system requirement Proposing the software system Management of planning the project Planning the software project management Generation of requirements of software Specifications of the requirements of the software Designing of the software Documenting the designing of the software Implementation of the software Coding the software Testing of the system Testing the software in the real time environment to see its applicability and helpfulness. Documentation the users feedback The service maintenance manual and the user manual are essential for documentation Testing of acceptance Testing the software to see its applicability as well as suitability among the users. 2.3 Evolution of SPMP The evolution of Software Project Management Planning is a realistic project planning that is essential for successful carrying out of the project. According to Pinto (2014) it has a clear software development plan that is essential for knowing the process of development of the system. The quality assurance plan specifies the quality procedures as well as standards that is required to be used. The validation plan shows the validation of the client for whom the system is developed. In addition to this, Kodukula (2014) commented on the fact that the configuration management plan also helps in understanding how the system will be installed as well as configured. The maintenance plan depicts the procedure of maintaining the system. Moreover, Ponnappa (2014) had a view that the SPMP also contains the staff development plan that helps in describing the skills of the participants that is essential to be developed. This includes the hardware and software resources and the risk analysis that is essential for successful completion of the project. Moreover, the work breakdown, tasks, deliverables and milestones also need to be recorded for tracking down the project by both the client and vendor. 3. Project Organization 3.1 Process Model In the project of ATM software for Bank of South Australia, there are two types of processes that are used during the project such as operation and support and maintenance. However, for maintenance, Bank of South Australia does not plan for any requirements (Juricek, 2014). Moreover, the entire operation and support are undertaken by the Terasoft. In order to develop the software, a waterfall model was undertaken by the project vendor (Refer to appendix 1). This diagram helps in identifying the flow of information, products and documents within the life cycle process of ATM software development for Bank of South Australia (Lai, 2014). In order to arrange properly of the software project development, life cycle model of waterfall has been designed that helps in developing the process as well as controlling the overall process of ATM software development (Malik, 2013). Apart from that, Mishra and Mishra (2013) argued waterfall life cycle model is more effective regarding visualization of process rather than other life cycle development model. Until the process has been completed, any process cannot begin (Marchewka, 2013). The project manager of ATM software development grouped the process into a textual list in terms of simplifying the diagrams. 3.2 Organizational Structure and Interface 3.2.1 Internal structure and Interface According to the demand of Bank of South Australia, Terasoft deigned their project for ATM software (Morales and Anderson, 2013). The vendor was used strong matrix that helps organisation in allocating their resources directly to the manager of project (Refer to appendix 2). 3.2.2 External Structure and interface Bank of South Australia is best known for their specialization in outside contracts. In order to develop the ATM software for Bank of South Australia, Terasoft Software Company use strong matrix. It helps in assembling the necessary resources by the project manager that underneath during the utilization (Harris, 2014). The external structure of Bank of South Australia, showed their interest because undertaken project shown the organisational chart properly (Ceschi et al., 2005). The project was designed is such as way were manager of each department were responsible. 3.3 Project Responsibilities According to the project advisor of ATM software development for Bank of South Australia, Resource Allocation Matrix plays the major roles and responsibilities (Refer to appendix 3). 4. Project Management and Control General Project Management The methodology will be prepared so that project can be managed in most effective form. Moreover, the progress can be measured along with track of schedule for accomplishment of project. Keeping the plan current If there is any requirement to make any necessary alteration in the management plan or any other important file then a change request has to be sending to the senior management of the Bank of South Australia. On the other hand, the owner of bank has to give approval to make changes. Process of managing project The management of the bank focus on continuous communication in order to feel relax about the process of bank. The schedule manager of the bank will provide required information to the management of bank regarding the progress of ATM software project and arriving deadlines (Ceschi et al., 2005). Moreover, the project manager will be involved in allocating the task to the members to complete the task on scheduled time. Measurement of the project progress In order to examine the project progress, the project manager has to conduct meeting with the workers or groups involved in software project development (Ghapanchi and Aurum, 2012). The project scheduled will help in knowing whether the job has been completed on time or not. Tracking of schedule The schedule manager will be involved in maintaining the schedule up to date and current by recording the progress of ATM software project in every phase so that time limit of the project can be met. Methodology for software development Requirements and desire of customer will be discovered. Flexible function will be defined in order to accommodate particular needs. Use of formal communication contracts and documents to the customers. Generate feedback from the customers. Dummy of the ATM software in order to test its feasibility. Examining the system to find any error. Launching the system after necessary changes. Verification and Validation The review of Faculty Advisor Review, peer reviews, Bank owner review and lastly acceptance of project sponsor will be important for giving final verdict to the ATM software plan. After that design of the product has to be verified with the required specifications so that it can satisfy the need of the sponsors. Delivery Plan The software will be installed in the banks ATM to know the success level and before making it public. Therefore, it will be tested and verification will be sought from the authorized personnel (Lai, 2014). Thus, if all things fall in place then all the system will be integrated for final use. Table 1: Project Management Plan Project Management Objectives and Priorities The main purpose of the project is to examine the needs for designing, implementing and maintaining the software for comprising the server of central bank and ATM client machine with the Bank of South Australia ATM network. Objective Priorities Completion of project in scheduled time Accomplishment of project within allocated budget Supply of all deliverables and meet all the requirements. Meeting at every stage of software development is prime priority. Meeting will be scheduled on Thursday and Saturday regularly Online teleconferencing meeting with the project manager and other members. Assumptions, Dependencies and Constraints ASSUMPTIONS Project falls in large project component Only software component will be delivered of the larger project Initial approximation for the project is approx 40% ATM hardware is being managed as split project and will be ready for the installation point. Estimated budget shall not exceed Expertise will be consulted to help out in designing the software for ATM server/client The design of the software system will not be dependent on any other product as it can be problem while integrating the system and it can become tough to use it. The major constraints for the project are budget, time, staff and maintenance of software. Risk Management RISK SOLUTION Loss of work/data The management of the bank or project manager has to be ready with backup plan. Project Processes The project manager has to monitor the progress on continuous basis so that each process and procedure is followed while developing software Budget In order to control the growing budget, the manger has to eliminate all the unproductive or non-usable product or system. Design Difficulty To have a better software design, the manager has to involve expert to help them out. Implementation difficulty The manager has to integrate all the system one by one to remove error. Hardware Failure A new box can be set up if required Change Management The project manager may send a change request form if any change is to be made in software program to the owner of bank. On the other hand, if worker is conducting mistake again and again then the worker can be replaced with more efficient and experienced one (Lalsing, 2012). Schedule Control The project manager can apply Earned Value Management System to perform the schedule control. Moreover, the critical path can be used for having control over activities and getting result in allocated time (Rose, 2012). Moreover, supervisor can monitor the progress of the project. Issue Resolution The project manager may need to have word with each individual to know the problem and providing solution to it. Moreover, the software expert can help the workers to make necessary changes if required (Wang and Tian, 2012). 5. Technical process 5.1 Methods, tools and techniques Methods: The entire project was developed based of waterfall software development methodology. Waterfall process development methodology delivered the products of software with proper working activities (Pellerin et al., 2013). Moreover, in order to make standard of designed software, project manager of ATM software development used IEEE standard software development life cycle process. These are as follows Understand the requirement very well before development the project and implement the process according to requirement. Definition of the project was stable In order to generate success of ATM software development project, waterfall methodology was selected. Technological tools and hardware has been selected according to project requirement. The entire project was developed based on IEEE standard. Tools: Desktop foundation of team member VM ware workstation 4.5 () One VM per activate project Adobe acrobat reader 10.0 Microsoft windows 2012 workstation Windows 7 Operating system For email and calendar IBM Lotus Notes R6 Microsoft Office 2007 professional version Document Publishing Microsoft word 2007 Project management Use electronic time sheet (Best Carpe Diem), Terametric, Microsoft and Project 2007 for managing the project. Testing IBM rational Robot was used for testing. Online Performance Reporting Microsoft internet service software 8.0 and Microsoft windows server 2012 was used for online performance reporting of ATM system. Implementation Advance C programme C++ and SDK (Software Development Kit) of Microsoft was used for the implementation of designed project (Uzzafer, 2013). Techniques: In order to develop the project of ATM software for Bank of South Australia Windows Open Service Architecture and Windows NT based platform were used. Apart from that, for the financial service of AT software, eXtentions also used by the project manager. Moreover, in order to design the project and implement it properly in the service process of Bank of South Australia, Object Modelling Technique (OMT) was used that maintain the purpose of object oriented method. 5.1.1 Documents of formal project The entire documents of project were edited and controlled using Microsoft Office 2007. In the word file project manager written documents with low complexity. Using Microsoft binder, project manager combined the application in word file. However, project manager unable to set security within the documents in order to use this documents by every member of the group (White, 2006). According to the project manager, documents of the projects were stored in the group server of Terasoft. In order to contain each file formally, new directory was created by the project manager into group server. However, each file were saved with respected ID name of the project using two digit revision number. 5.1.2 Configuration files of software packages Repository documents are stored in the Local Area Network of Terasoft. Apart from that, configuration of project also manages in the LAN server of Terasoft. Each image of workstation was able to access from the LAN server of Terasoft (XIE, WANG and XIAO, 2010). For performance reporting, Tearsoft-NNB extranet were configured by the project manager. 5.1.3 Web based help files Project managers used Microsoft front page for writing the web based help files. In the server, documents files were stored with the respected version of ATM software. 5.2 Software User Documentation During the training program, project manager verified the software documentation by the management staffs of Bank of South Australia. However, the software documentation is used as a part of training to the staffs of Bank of South Australia. The software document was made easily for using each user. In the software document, each task broken into subtasks. In order to refine the software document, feedback is collected from the user. 5.3 Documents With the expectation of software project management plan (SPMP) project manager plays the leading role in document preparation of this project. Terasoft designed the project according to the demand of Bank of South Australia. Therefore, executive committee of Bank of South Australia approved the project documents. 6. Activities, Schedule and Budget Activities and Tasks Phase Task Analysis of System Requirements Project Identification Development of project proposal Project Management Plan Design WBS Structuring Schedule Forming SPMP Generation of software requirement Analysis of entire requirement Designing technical specification Preparation of SRS Software Design Organize architectural design Developing detailed Design Developing SDD Implementation Noting Code Conducting Unit Test Carrying integration testing Test of system Planning system test Conducting system testing Preparing System Test Document and Result User Documentation Structuring and carving users manual Accepting test Conducting acceptance test Resource Requirements Human resource and material resource will be required to accomplish the goal. Project Manager Requirement Analyst Software Architect Programmer Verification Engineer Expertise with detailed ATM skill and knowledge Technical Writer and Printing Services Database Engineer Installation Specialist Computer time for generation of object code Computer software purchase References Ceschi, M., Sillitti, A., Succi, G. and De Panfilis, S. (2005). Project Management in Plan-Based and Agile Companies. IEEE Softw., 22(3), pp.21-27. Ghapanchi, A. and Aurum, A. (2012). The impact of project capabilities on project performance: Case of open source software projects. International Journal of Project Management, 30(4), pp.407-417. Harris, P. (2014).Planning and control using Oracle Primavera P6 - versions 8.2 8.3 EPPM web. Victoria, Australia: Eastwood Harris Pty Ltd. Juricek, J. (2014). Agile Project Management Principles.LNSE, pp.172-175. Lai, S. (2014). A WBS-Based Plan Changeability Measurement Model for Reducing Software Project Change Risk. LNSE, pp.94-99. Lalsing, V. (2012). People Factors in Agile Software Development and Project Management. IJSEA, 3(1), pp.117-137. Malik, J. (2013).Agile Project Management with GreenHopper 6 Blueprints. Packt Publishing. Marchewka, J. (2013).Information technology project management. Hoboken, N.J.: Wiley. Mishra, A. and Mishra, D. (2013). Software project management tools.SIGSOFT Softw. Eng. Notes, 38(3), p.1. Morales, P. and Anderson, D. (2013).Process simulation and parametric modeling for strategic project management. New York, NY: Springer. Pellerin, R., Perrier, N., Guillot, X. and Lger, P. (2013). Project Management Software Utilization and Project Performance.Procedia Technology, 9, pp.857-866. Rose, K. (2012). Refining the Knowledge Production Plan: Knowledge Representations in Innovation Projects. Project Management Journal, 43(6), pp.114-114. Uzzafer, M. (2013). A contingency estimation model for software projects.International Journal of Project Management, 31(7), pp.981-993. Wang, L. and Tian, L. (2012). Affinity and Tacit Knowledge Management in Project Team. Journal of Software, 7(9). White, A. (2006). External disturbance control for software project management.International Journal of Project Management, 24(2), pp.127-135. XIE, L., WANG, Q. and XIAO, J. (2010). Reducing Plan Change: A Risk Driven Software Project Buffer Allocation Method.Journal of Software, 21(12), pp.3029-3041. Yang, T. (2012). The Facilities Plan and Project Management Based on the Optimize Correlation of Logistics and Production Construction. AMR, 542-543, pp.339-343. Deeprose, D. (2002). Project management. Oxford, U.K.: Capstone Pub. Kodukula, P. (2014). Enterprise Project Portfolio Management: Building Competencies for RD and IT Investment Success. Project Management Journal, 45(1), pp.e1-e1. Lock, D. (2004). Project management in construction. Aldershot: Gower. Meng, X. (2012). The effect of relationship management on project performance in construction. International Journal of Project Management, 30(2), pp.188-198. Meng, X. and Gallagher, B. (2012). The impact of incentive mechanisms on project performance. International Journal of Project Management, 30(3), pp.352-362. Peslak, A. (2012). Information Technology Project Management and Project Success. International Journal of Information Technology Project Management, 3(3), pp.31-44. Petit, Y. (2012). Project portfolios in dynamic environments: Organizing for uncertainty. International Journal of Project Management, 30(5), pp.539-553. Pinto, J. (2014). Project management, governance, and the normalization of deviance. International Journal of Project Management, 32(3), pp.376-387. Ponnappa, G. (2014). Project Stakeholder Management. Project Management Journal, 45(2), pp.e3-e3. Randolph, S. (2012). Fundamentals of Project Management, Fourth Edition. Project Management Journal, 43(4), pp.81-81 Banksa.com.au, (2015).BankSA - Personal Banking | Business Corporate Banking. Available at: https://www.banksa.com.au/ [Accessed 11 Feb. 2015]